Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Scientific Reports volume 14, Article number: 12628 (2024 ) Cite this article calcium bromide liquid
Completion fluids play a vital role in well-related processes within the oil extraction industry. This article presents a comprehensive study of the properties and performance of various brine solutions as completion fluids for different well and reservoir conditions. Attributes examined include density, corrosion resistance, temperature stability, compatibility with formation fluids, clay swelling potential and influence on wettability. The research highlights the significance of selecting appropriate completion fluids to optimize well and reservoir operations. Zinc chloride emerges as an excellent option for high density applications, while sodium chloride and potassium formate solutions are ideal for extreme cold conditions. Potassium acetate outperforms calcium chloride and potassium chloride and has excellent pH stability. The compatibility of completion fluids with formation water has been observed to be excellent, with no sedimentation or emulsion formation. Potassium acetate also experiences minimal clay swelling, making it suitable for clay-rich formations. On the other hand, calcium chloride has a higher clay swelling than most of the brines tested, making it less suitable for sandstone formations with a higher clay content than these brines. The research evaluates the water-wetting abilities of completion fluids in carbonate and sandstone formations. Potassium chloride and zinc chloride have the most significant impact in carbonate formations, while potassium acetate and potassium formate excel in sandstone formations. This study provides a comprehensive understanding of completion fluids, facilitating informed decisions that maximize operational efficiency, protect reservoir integrity, and enhance hydrocarbon recovery. The appropriate selection of completion fluids should align with specific well and reservoir conditions, considering the priorities of the application.
Various salts are discussed in this article. Among the tested brine options, zinc chloride stands out. This salt has been employed in the oil industry for centuries. However, it poses environmental risks and can accumulate in the bodies of aquatic organisms. Additionally, it has a relatively short lifespan in terms of maintenance9. Another fluid under investigation is potassium formate which is a formate-based fluid. These fluids were initially developed in 1990 for high-temperature applications. Since 2000, they have gained widespread use in Canada, China, and Russia. Reports from these fields often highlight improved well stability, increased drilling speed, excellent thermal stability, and higher production rates after well completion10. Formate-based fluids encompass a wide range of densities. They do not cause formation damage and promote clay stability11,12,13. Formate brines are environmentally friendly and do not pose issues for personnel14. Common formate fluid salts include sodium formate with a density of 1.33 g/cm3, potassium formate with a density of 1.59 g/cm3, and cesium formate with a density of 2.3 g/cm315. The first usage of potassium formate, along with manganese tetroxide, was in the Gulfaks field in Norway13.
As can be seen from existing literature, although several studies have been conducted on common brines, none of these studies have been conducted on many brines under the same experimental conditions. Furthermore, the mechanisms of formation damage have either not been explored or have not been comprehensively investigated in prior research.To address this gap, a comparative analysis presented in Table 1 contrasts the documented findings with new empirical results, offering a detailed and systematic assessment of various brines and the corresponding mechanisms of formation damage. This paper endeavors to investigate the numerous necessary properties of completion fluids for various medium-weight and heavy brines under the same experimental conditions. the necessary properties also include evaluating the formation damage that these solutions may cause in different reservoir conditions. The work steps of the investigations are respectively density assessment, corrosion testing, viscosity analysis, stability testing at high and low temperatures, as well as assessments of compatibility with various formation waters, oil compatibility, clay swelling, and the wettability alteration of reservoirs by completion fluids.
In this study, brines of zinc chloride, calcium chloride, potassium chloride, sodium chloride, potassium acetate, and potassium formate, each with specific densities and pH levels, have been meticulously prepared. Table 2 below provides an overview of the characteristics of these brine solutions.
As depicted in Fig. 1, thin physical samples of carbonate and sandstone, each measuring 0.08 inches in thickness, were meticulously prepared to assess the wettability alterations induced by the completion fluids.
Steel samples crafted from L80 alloys were employed for the corrosion evaluation. The characteristics of these steel samples are detailed in Table 3.
In this study, formation water and crude oil were collected from an oil and gas field in southern Iran for experiments. These samples were gathered from various wells within the field and transported to the laboratory under controlled conditions. Subsequently, the samples underwent filtration, stabilization, and were stored in suitable containers for further analysis. The ionic constituents of the formation water and crude oil were determined using standard methods and instruments, including ion chromatography, gas chromatography, and mass spectrometry. The results are presented in Tables 4 and 5, respectively.
Oil and gas reservoirs typically operate under high temperature and pressure conditions, necessitating the use of heavy-weight completion fluids to balance the fluid's hydrostatic pressure and the reservoir pressure. However, the required weight of the completion fluid varies based on the reservoir's depth. For shallow reservoirs with high pressure, a heavy and costly completion fluid (exceeding 100 pounds per cubic foot) may be essential. Conversely, for deeper reservoirs, medium-weight completion fluids with a lower cost might suffice, as the hydrostatic pressure on the reservoir increases with depth4. The density of a brine is determined by the type and concentration of the salt it contains. In this section, fluid density is measured using a pycnometer in accordance with ISO 13503-3-2006. This method entails weighing the pycnometer with the fluid, subtracting the weight of the empty pycnometer, and then dividing by the volume of the pycnometer28.
In oil and gas well operations, the integrity of well structures is paramount. Corrosion tests are essential to evaluate the potential impact of completion fluids on well construction materials, such as L80 steel. The primary quality of a completion fluid is its non-corrosive nature, as brines, commonly used as base fluids, can induce corrosion, posing risks to wellbore pipes and equipment24,29,30,31,32. The corrosion testing procedures delineated in this section are conducted in strict adherence to the comprehensive guidelines specified in API RP13 standards. The testing sequence commences with the meticulous measurement of the L80 steel coupon's weight, employing a precision scale with four decimal places. Subsequently, the density and pH levels of the completion fluid are meticulously ascertained. Following these initial measurements, the completion fluid is combined with the coupon, and the entirety is positioned within a dedicated corrosion cell. This specialized cell subsequently undergoes placement within an oven set to an exacting temperature of 149 °C. Moreover, the cell is subjected to a pressure environment reaching 2.76 MPa, and the incubation period extends over a span of 72 h. Upon the conclusion of this exposure period, the cell is painstakingly opened, facilitating the careful separation of the completion fluid from the steel coupon. This sequence culminates with a comprehensive cleaning process of the coupon, followed by the recalibration of its weight. Ultimately, the extent of corrosion induced by the completion fluid is meticulously quantified, expressed in millimeters per year, utilizing the precise mathematical Eq. (1)33.
Temperature stability is a critical aspect when evaluating the performance of completion fluids. Both low- and high-temperature stability tests are conducted to ensure that these fluids maintain their integrity under varying conditions.
Low-temperature stability testing aims to determine the crystallization temperature of brine. This temperature marks the point at which solids begin to form. These solids can take the form of ice crystals (due to the freezing of water) or salt crystals precipitating because of reduced solubility. The precipitation of salt crystals not only reduces the solution’s density but can also obstruct pipelines, disrupt pumping operations, and clog filtration systems. Furthermore, it poses the risk of diminishing hydrostatic pressure in the brine, potentially leading to fluid loss and well control incidents. In this test, brine samples are carefully placed in a freezer at – 10 °C for a duration of 72 h. The test aims to observe the presence or absence of fluid sedimentation and crystallization.
For wells operating at significant depths, the completion fluids used may undergo precipitation or undergo alterations in their characteristics due to elevated temperatures. These temperature-induced changes can have a significant impact on the requisite attributes of the completion fluid. High-temperature stability tests are carried out to assess the clarity, density, and pH of the fluids under different temperature conditions, allowing for a comparative analysis. The test commences by transferring the selected brines into specially designed glass containers that are resistant to high temperatures and properly sealed to prevent liquid evaporation. The samples are subjected to a range of temperatures, including 25, 40, 60, 80, 100, and 120 °C. After a day at each temperature, measurements are taken to ascertain the density and pH of the samples, providing critical insights into the stability of completion fluids across a spectrum of operating conditions.
Oil and gas wells can suffer from formation damage during any phase of drilling, completion, or stimulation. The formation can be harmed by the fluids that are used for these operations, as they may penetrate into it8,34,35. To avoid or minimize formation damage, it is essential to understand how the completion fluids affect the formation36. The completion fluid should have a pH between 7 and 9 because higher pH levels can weaken the sandstone reservoir’s structure27. This section examines the clay swelling caused by brines, the wettability changes induced by the fluid, and the compatibility of the brine with the formation fluids.
Clay swelling, a crucial consideration in oil and gas operations, is a phenomenon where water molecules envelop the crystalline structure of clay, causing an expansion in both distance and volume37. This expansion can detrimentally affect the permeability of the formation, potentially leading to decreased operational efficiency. In the context of drilling mud and water-based completion fluids, clay swelling is particularly problematic when these fluids infiltrate sedimentary rock formations. Such swelling can disrupt oilfield operations and result in substantial cost implications, making the mitigation of clay swelling a matter of paramount importance38. It is notable that clays with higher exchange capacities, such as smectite and their mixtures, exhibit pronounced swelling behavior, especially when situated within the larger pores of reservoir rock. This swelling creates nearly impermeable barriers to fluid flow. In contrast, clays with lower exchange capacities, such as kaolinite, illite, and chlorite, do not swell to the same extent upon hydration39. The addition of salt to drilling fluids is a common practice to minimize clay swelling since clay tends to swell more in pure water than in brine40,41,42.
The objective of this test is to evaluate the extent of clay swelling when exposed to various completion fluids. The procedure adheres to ASTM D5890 standards (ASTM 2006) for consistency and reliability43. Thus, the steps to perform the test are as follows:
Clay Preparation: Begin by isolating 2 g of bentonite clay powder.
Completion Fluid Primary: Place 90 cubic centimeters of the selected completion fluid into a 100 cubic centimeter test tube.
Incremental Clay Addition: Add 0.1 g of the 2 g of separated clay to the completion fluid at 10-min intervals until the clay is entirely hydrated.
Observation and Comparison: Following clay hydration, transfer a small amount of the completion fluid to an empty container containing the remaining 2 g of clay. Blend this mixture with the fluid from the test tube.
Volume Measurement: Return the mixture to the test tube, adding completion fluid as necessary to reach a total volume of 100 cubic centimeters.
Post-Hydration Observation: After a 24-h waiting period, observe and measure the volume of the clay, comparing it to its initial volume.
Wettability, or a liquid's ability to stick to a solid surface, depends on a delicate balance between intermolecular interactions that stick (liquid-to-surface) and don’t stick (liquid-to-liquid)44. The ability of pore surfaces to hold water has a big effect on how different types of fluid move and settle in rock formations below the surface. This has a huge effect on how badly formations are damaged in oil reservoirs. Predicting how wettability will affect formation damage is hard because it changes over time and is affected by interactions between rocks and fluids as well as changes in the conditions of the reservoir45,46. Wettability, characterized by contact angles and correlated with surface tension, plays a pivotal role in oil reservoirs. Contact angles between 0° and 70° indicate highly water-wet rocks, while angles ranging from 110° to 180° signify a strong oil-wet nature. Intermediary wettability is attributed to contact angles between 70° and 110°47. This experiment aims to scrutinize the capacity of completion fluids to modify the wettability of reservoir formations, consequently enhancing production yields. The experimental procedure commences with the transformation of sandstone and carbonate- thin physical samples into oil-wet surfaces. To achieve this, these thin physical samples are immersed in a 0.01 M stearic acid solution and exposed to a temperature of 65.5 °C for 48 h. Following this treatment, the thin physical samples undergo a thorough wash with water and n-heptane. Subsequently, they are delicately positioned on the surface of water, and a droplet of kerosene, administered via a syringe, is dispensed beneath them. The interface of this droplet is meticulously captured through imaging with the assistance of Digimizer software, allowing for precise measurement of the contact angle. In instances where the thin physical samples exhibit an oil-wet disposition, they are introduced to the designated completion fluid and subjected to an aging similar to the previous step. This process is followed by the repetition of the aforementioned steps to ascertain whether these sections have undergone a transformation towards being water-wet or not4,48,49. This experiment tells us a lot about how completion fluids might be able to change how wet a reservoir is, which could lead to more oil being produced from hydrocarbon reservoirs.
In the context of this basin, the notion of fluid compatibility bears substantial importance. Fluid incompatibility surfaces when two fluids, upon their amalgamation, exhibit a tendency to separate into distinct phases or form an emulsion in the presence of salts or other solid constituents. Such incompatibility poses a notable risk of sediment formation within the porous media of the reservoir formation, potentially leading to pore blockage and detrimental formation damage. One of the most renowned instances of fluid incompatibility arises from the interaction of seawater with formation water. The characteristics that define this incompatibility hinge on the stark contrast between their respective ion compositions. Seawater is characterized by a high concentration of sulfate ions coupled with low levels of calcium, barium, and strontium ions. In stark contrast, formation water exhibits the inverse, boasting low sulfate ion concentrations and high levels of calcium, barium, and strontium ions. The outcome of their convergence is the precipitation of compounds such as calcium sulfate, barium sulfate, and strontium sulfate salts, which manifest as undesirable sediments4,45,50,51.
This section of our study revolves around a comprehensive assessment designed to probe the compatibility dynamics between completion fluids and various formation fluids. Notably, the latter encompasses formation water and crude oil. To scrutinize this intricate interplay, we have devised a series of meticulous experiments. Our aim is twofold: to ascertain the propensity for sediment formation or its absence after the amalgamation of desired completion fluids and diverse formation fluids across varying volume ratios, all subjected to elevated temperatures. The experimental protocol is orchestrated as follows:
Preparation of Fluid Mixtures: Completion fluids are meticulously blended with formation fluids in three distinct ratios: 1:1, 1:3, and 3:1.
Sealing in Resilient Glass Containers: These precisely concocted fluid mixtures are then carefully transferred to specialized glass bottles, engineered to withstand the rigors of autoclave temperatures.
Exposure to Elevated Temperatures: The sealed glass bottles, each representative of a distinct fluid mixture, are entrusted to an environment where temperature soars to 80 °C. This arduous environment serves as the crucible for assessments, simulating reservoir conditions in a controlled laboratory setting.
Post-Exposure Assessment: Following an aging period of 72 h, the samples are delicately extracted from their high-temperature crucible. Diligent examinations are directed towards the identification of sedimentation or the conspicuous absence thereof.
These well-planned experiments give a solid basis for figuring out how well different formation fluids and completion fluids work together. This helps in getting a full picture of the problems and interactions that might happen. Looking at how sediment forms when volume ratios change and temperatures rise helps in understanding how fluid compatibility affects the integrity and performance of reservoirs, which in turn helps in making smart decisions in real-world situations.
The density of brine solutions plays a crucial role in their performance and suitability for a range of oil and gas operations. In this part, the density of different brine solutions was studied at different concentration levels. These solutions included calcium chloride, potassium chloride, sodium chloride, potassium formate, potassium acetate, and zinc chloride. The outcomes are visually depicted in Fig. 2, which effectively illustrates the connection between density and salt concentration for each respective brine solution.
Graphs of the concentration of salt dissolved in water for brines.
An instructive insight gained from Fig. 2 is the pronounced density of calcium chloride brine relative to all chloride-based brines, with potassium chloride brine trailing in second place. This alignment with established literature reinforces the prevailing use of calcium chloride and potassium chloride as primary medium-density brines in activities related to well completion and workover operations. Moreover, the data reveals that, at a temperature of 25 ℃, potassium chloride brine achieves a higher peak density compared to its sodium potassium chloride counterpart. This finding implies a greater efficacy of potassium chloride in augmenting the density of water-based fluids when compared to sodium chloride.
Equally noteworthy, the data in Fig. 2 unveils an intriguing non-linear relationship between density and salt content for potassium formate and potassium acetate brines, setting them apart from their counterparts, which exhibit a linear behavior. This suggests the ease with which the density of these brines can be adjusted by modifying the concentration of potassium formate and potassium acetate. Furthermore, these brines exhibit moderate densities in contrast to their peers, rendering them particularly suitable for deployment in the context of deep, high-pressure wells. This is especially beneficial as the use of high-density fluids may give rise to formation damage or operational complications in such conditions. However, it is essential to acknowledge the challenges encountered during the course of this study, particularly the procurement of pure zinc chloride salt. The zinc chloride salt utilized in this study contained a noteworthy quantity of impurities, posing an impediment to generating a clear density graph. Despite this challenge, a solution was achieved by dissolving 760 g of zinc chloride in 300 cc of water. The resultant solution initially appeared cloudy but was successfully clarified following a filtration process. This observation indicates the substantial potential of zinc chloride as a high-density brine, a point of considerable significance.
In the context of corrosion testing, a series of comprehensive experiments were conducted at an elevated temperature of 149 °C, focusing on a range of brine solutions. The detailed results of these corrosion tests are meticulously documented in Table 6, providing a comprehensive overview of the corrosion characteristics exhibited by these fluids. Additionally, Fig. 3 serves as a visual representation of the transformation in corrosion coupons before and after these rigorous corrosion tests.
Sample of corrosion coupons after and before corrosion test.
A thorough analysis of Table 6 unequivocally reveals that both calcium chloride and potassium acetate exhibit higher corrosion rates compared to the other examined fluids. Intriguingly, calcium chloride demonstrates a notably higher corrosion rate than potassium acetate. In scenarios where corrosion rate is of paramount concern within a well, it becomes apparent that potassium acetate solution presents a more favorable option when contrasted with calcium chloride. In cases where these specific fluids are deemed indispensable for operational requirements, the judicious deployment of corresponding corrosion inhibitors is highly recommended. It is vital to underscore the significance of maintaining the pH of the completion fluid within the optimal range of 7–9.5. This pH range not only plays a pivotal role in corrosion control but also serves as a preventive measure against clay swelling. As elucidated in Table 6, the pH levels of all fluids, except for zinc chloride, steadfastly fall within the recommended pH range of 7–9.5. This observation is particularly remarkable given the fact that zinc chloride, despite its exceptionally low pH and the presence of zinc ions, typically associated with heightened corrosion rates, displays the lowest corrosion rate when juxtaposed with the other tested solutions. It is imperative to acknowledge that potassium chloride and sodium chloride solutions were not subjected to these specific corrosion tests. This decision was based on the extensive body of prior research conducted on these solutions and their distinctly low densities, rendering them unsuitable for inclusion in the current study.
In the evaluation of low-temperature stability, a noteworthy distinction emerged among the tested brines. As depicted in Fig. 4, it’s evident that potassium acetate, potassium chloride, and calcium chloride brines experienced crystallization at a frigid temperature of – 10 °C. This crystallization phenomenon is a crucial consideration as it can potentially lead to blockages in pipelines, interference with pumping operations, and clogging of filtration systems. However, intriguingly, the potassium acetate solution exhibited notably less crystallinity compared to calcium chloride. On the other hand, zinc chloride, sodium chloride, and potassium formate brines demonstrated resilience, showing no discernible signs of precipitation or crystallization under these extreme cold conditions.
Brine solutions after low temperature stability test.
High-temperature stability is a crucial aspect when assessing completion fluids, especially for wells exposed to elevated downhole temperatures. Figures 5 and 6 present the key findings regarding density and pH changes following high-temperature stability tests. Moreover, Fig. 7 provides visual insights into the outcomes of these experiments for each solution.
Density changes of brines with increasing temperature (after high temperature stability test).
pH changes of brines with increasing temperature (after high temperature stability test).
Appearance changes of brines with increasing temperature (after high temperature stability test).
In the case of potassium formate brine, the test outcomes are illuminating. The increase in temperature from 25 to 120 °C resulted in a substantial drop in fluid density, reaching as low as 0.037 g per cubic centimeter. The pH also exhibited a noticeable decline within this temperature range, settling around 1. The results highlight the sensitivity of potassium formate brine to high-temperature conditions, with a significant impact on both density and pH. The high-temperature stability tests for calcium chloride brine also showed that its density and pH dropped. It dropped by about 0.034 g per cubic centimeter and had pH shifts that were not good when it was exposed to temperatures between 25 and 100 °C. However, the test at 120 °C faced challenges due to the extreme conditions, resulting in vaporization and unrealistic density values. Nonetheless, Fig. 7 illustrates that the solution remained completely clear despite these harsh conditions. As the temperature increased from 25 to 100 °C, potassium chloride brine showed a decrease in density of less than 0.029 g per cubic centimeter and a pH reduction of roughly 1 pH unit. Significant fluid vaporization hindered the test at 120 °C, as seen in the other brines, making density readings unrealistic. Nevertheless, Fig. 7 demonstrates the brine's ability to maintain clarity under these demanding conditions. Sodium chloride brine exhibited the lowest density reduction, approximately 0.025 g per cubic centimeter, as temperatures elevated from 25 to 100 °C. The pH experienced a moderate reduction of 0.4 pH units, with an initial gradual decrease followed by an increase within the 60–120-degree range. Despite facing challenges during the test at 120 °C due to vaporization, Fig. 7 displays the continued clarity of the solution. Contrastingly, the high-temperature stability test for zinc chloride solution unveiled more significant shifts. As the temperature escalated from 25 to 120 °C, the density decreased by approximately 0.066 g per cubic centimeter. Notably, the solution exhibited a color change to bright yellow, signifying the potential issues when employing zinc chloride solution in high-temperature wells. Careful consideration is advised when using this solution under such conditions. The temperature stability assessment of potassium acetate brine revealed unique characteristics. The density decreased to about 0.039 g per cubic centimeter as the temperature climbed from 25 to 120 °C. However, the pH displayed intriguing behavior. It decreased up to 60 °C and, contrary to expectations, increased until reaching 80 °C. Subsequently, as the temperature peaked at 120 °C, the pH decreased to 8.85. Figure 7 visually captures the slight yellowing of the solution as the temperature gradually increased. These observations suggest that potassium acetate solution exhibits higher density loss compared to other solutions, necessitating careful handling in high-temperature well applications.
The clay swelling tests were performed on five distinct fluids: zinc chloride, calcium chloride, potassium chloride, potassium acetate, and potassium formate. The outcomes of this investigation are summarized in Table 7, and a visual representation of the clay swelling test for these fluids is provided in Fig. 8.
Clay swelling test of brines after 24 h.
As depicted in Fig. 8, the clay immersed in the potassium chloride brine exhibited minimal swelling after a 24-h period. This result aligns with expectations, as potassium chloride brine contains potassium ions, which function as inhibitors of clay swelling, a well-established practice in the drilling and completion industry38,52.
Furthermore, upon closer examination, the swelling index for potassium formate brine is approximately 4 cubic centimeters per 2 g of clay. Surprisingly, it was observed that this fluid induced less swelling in comparison to calcium chloride. Figure 8 also reveals the behavior of the clay when subjected to potassium acetate. The presence of potassium ions in this salt mitigated significant swelling, resulting in a swelling index of approximately 3 cubic centimeters per two grams of clay. This data strongly suggests that potassium acetate brine is effective at reducing clay swelling, outperforming other brines except for potassium chloride. In the case of zinc chloride, Fig. 8 illustrates that this brine, similar to calcium chloride, exhibits a swelling index of 4 cubic centimeters per two grams of clay. This indicates that zinc chloride does not offer a substantial advantage over calcium chloride in mitigating clay swelling.
The contact angles of different brines on carbonate and sandstone thin physical samples before and after aging (which was explained in the “Methods” section) were measured to investigate the effects of completion fluids on wettability. Aging simulated the long-term exposure of the rock to the completion fluid under reservoir conditions. five types of brines with varying salt concentrations and compositions were used: HCOOK (potassium formate), CH3OOK (potassium acetate), KCl (potassium chloride), CaCl2 (calcium chloride) and ZnCl2 (zinc chloride). Kerosene was used as the oil phase to create a two-phase system. Seven thin physical samples from carbonate and sandstone cores, labeled as AC1 to AC5 and AS1 to AS2, respectively, were prepared. Each thin physical sample was conditioned by applying a drop of kerosene to its surface and spreading it evenly.
Figure 9 shows the images of thin physical samples sections before and after aging with different brines, along with the measured contact angles. Table 8 summarizes the results of the contact angle measurements and the corresponding wettability status of each thin physical sample after aging. The wettability status was classified into four categories based on the contact angle values: strongly water-wet (< 70°), intermediate wettability (70°–110°), and strongly oil-wet (> 110°).
Wettability test of thin physical samples.
This critical phase of our study delves into the intricate dance of compatibility between our carefully selected completion brines, formation water, and crude oil. The acquired results, unveiled within Table 9, find visual representation in Fig. 10, offering a comprehensive understanding of this complex interplay.
Before and after compatibility test samples solution.
The results show that all completion fluids are compatible with formation water, as no sediment formation was observed in any of the mixtures. This indicates that the completion fluids do not react with the formation water or cause any precipitation or scaling. This is desirable for maintaining the porosity and permeability of the reservoir rock. The results also show that all completion fluids are compatible with crude oil, as no sediment formation was observed in any of the mixtures. This indicates that the completion fluids do not interact with the crude oil or cause any emulsion or asphaltene deposition. This is beneficial for enhancing oil mobility and recovery. The only exception was sodium chloride solution, which was excluded from the investigation due to its very low density. Sodium chloride solution may not be suitable for this reservoir, as it may cause density-driven convection and fingering phenomena that can reduce the sweep efficiency and oil recovery. These findings demonstrate the potential suitability of these completion fluids for real-world reservoir applications. The compatibility of these brines with formation water and crude oil implies that they can be used safely and effectively without causing any adverse effects on reservoir performance.
In conclusion, the comprehensive testing of various brine solutions for their efficacy as completion fluids has revealed a range of unique properties and characteristics. The results of these experiments shed light on the suitability of these fluids for different well and reservoir conditions. The findings can be summarized as follows:
Zinc chloride stands out with the highest maximum density of 1.89 g per cubic centimeter, making it a notable option for applications requiring high-weight completion fluids. Potassium acetate and potassium formate with maximum densities of 1.39 and 1.6 g per cubic centimeter exhibit a gradual decrease in density with increasing salt concentrations.
Zinc chloride, sodium chloride, and potassium formate solutions demonstrate exceptional resistance to precipitation or crystal formation when subjected to extreme cold conditions of – 10 °C, making them ideal choices for offshore operations. Potassium acetate also outperforms calcium chloride and potassium chloride.
Temperature sensitivity is a consideration, with sodium chloride displaying the least density reduction (0.025 g per cubic centimeter) and potassium acetate exhibiting the most significant decrease (0.04 g per cubic centimeter) after zinc chloride (0.066 g per cubic centimeter). Zinc chloride should be used cautiously in high-temperature wells. pH level reductions vary, with potassium acetate having the highest pH and calcium chloride the lowest after zinc chloride. Potassium acetate also shows superior pH stability compared to potassium formate.
The compatibility of these fluids with formation water is excellent, with no sediment or emulsion formation with crude oil observed.
Bentonite clay swelling is minimal in potassium acetate brine (≈ 3.2 g/cc), second only to potassium chloride (≤ 1.2g/cc). Calcium chloride, on the other hand, exhibits the highest clay swelling (≈ 4.2 g/cc), making it unsuitable for formations with a high clay content.
The ability of completion fluids to water-wet carbonate and sandstone formations varies. Potassium chloride and zinc chloride show the most significant impact on water-wetting carbonate formations by reducing the contact angle by 99.865° and 83.85° respectively, while potassium formate has a minimal effect (17.255°).
Despite their high pH, calcium chloride solution cause the highest corrosion (2.540) amongst the fluids.
In summary, the choice of the right completion fluid depends on the specific well and reservoir conditions at the time, considering the priority characteristics for the given application. Each solution has its own unique advantages and disadvantages, and this research provides valuable insights to guide such selection processes. Ultimately, the optimal completion fluid should be chosen to best meet the needs of the specific situation and objectives.
All data generated or analyzed during this study are included in this published article.
Wang, Q. Fluid Chemistry, Drilling and Completion (Gulf Professional Publishing, 2021).
Khaleghi, M. R., Khamehchi, E., Abbasi, A. & Kalatehno, J. M. Evaluation of the effectiveness of mixing hydrochloric acid and organic acid as stimulation fluids in a tight gas carbonate reservoir. Can. J. Chem. Eng. 2024, 44 (2024).
Khamehchi, E., Dargi, M., Imeri, M., Mahdavi Kalatehno, J. & Khaleghi, M. R. Pipe diameter optimization and two-phase flow pressure drop in seabed pipelines: A genetic algorithm approach. Interciencia https://doi.org/10.59671/9tuvf (2023).
Kalatehno, J. M. & Khamehchi, E. A novel packer fluid for completing HP/HT oil and gas wells. J. Petrol. Sci. Eng. 203, 108538 (2021).
Sangka, N. B. & Budiman, H. Application of nitrate based fluid as a completion fluid. In Abu Dhabi International Petroleum Exhibition and Conference (SPE, 2016).
Jia, H., Hu, Y. X., Zhao, S. J. & Zhao, J. Z. The feasibility for potassium-based phosphate brines to serve as high-density solid-free well-completion fluids in high-temperature/high-pressure formations. SPE J. 24(05), 2033–2046 (2019).
Kalatehno, J. M., Khamehchi, E., Abbasi, A. & Khaleghi, M. R. A novel approach to determining appropriate additive concentrations for stimulation of gas carbonate reservoirs. Results Eng. 2023, 101440 (2023).
Dargi, M., Khamehchi, E. & Mahdavi, K. J. Optimizing acidizing design and effectiveness assessment with machine learning for predicting post-acidizing permeability. Sci. Rep. 13(1), 11851 (2023).
Article ADS CAS PubMed PubMed Central Google Scholar
Paul, J. R. & Plonka, J. H. New high-density completion fluids meet needs of high-pressure offshore wells. In Offshore Technology Conference (OTC, 1974).
Gao, C. H. A survey of field experiences with formate drilling fluid. SPE Drill. Complet. 34(04), 450–457 (2019).
Downs, J. Formate brines: Novel drilling and completion fluids for demanding environments. In SPE International Conference on Oilfield Chemistry? (SPE, 1993).
Ramsey, M. S., Shipp, J. A., Lang, B. J., Black, A. & Curry, D. Cesium formate: Results and analysis of drilling with a new high density unweighted brine. In SPE Annual Technical Conference and Exhibition? (SPE, 1996).
Svendsen, Ø., Toften, J., Marshall, D. & Hermansson, C. Use of a novel drill-in/completion fluid based on potassium formate brine on the first open hole completion in the gullfaks field. In SPE/IADC Drilling Conference and Exhibition (SPE, 1995).
Downs, J., Killie, S. & Whale, G. Development of environmentally benign formate-based drilling and completion fluids. In SPE International Conference and Exhibition on Health, Safety, Environment, and Sustainability? (SPE, 1994).
Howard, S. K. Formate brines for drilling and completion: State of the art. In SPE Annual Technical Conference and Exhibition? (SPE, 1995).
Lomba, R. F., De-Sa, C. H. & Brandao, E. M. A new approach to evaluate temperature effects on rheological behavior of formate-based fluids. J. Energy Resour. Technol. 124(3), 141–145 (2002).
Javora, P. H., Ke, M., Stevens, R. F. & Berry, S. L. The chemistry of formate brines at downhole conditions. In International Symposium on Oilfield Chemistry (OnePetro, 2003).
Downs, J., Blaszczynski, M., Turner, J. & Harris, M. Drilling and completing difficult HP/HT wells with the aid of cesium formate brines—a performance review. In SPE/IADC Drilling Conference and Exhibition (SPE, 2006).
Gomez, S. & Patel, A. Shale inhibition: What works? In SPE International Conference on Oilfield Chemistry? (SPE, 2013).
Chen, Z., Li, L., Zhang, G., Qiu, Y. & Guo, X. Inhibition effect of propargyl alcohol on the stress corrosion cracking of super 13Cr steel in a completion fluid. Corros. Sci. 69, 205–210 (2013).
Xuanpeng, L., Fenghua, H., Dezheng, L., Jianhua, Z. & Weihui, Z. Study and application of scale inhibitory solids-free workover fluid. Drilling and Completion Fluids 32(4), 45–47 (2015).
Fleming, N. et al. Formate drilling and completion fluids: Evaluation of potential well-productivity impact, Valemon. SPE Prod. Oper. 31(01), 22–28 (2016).
Al Moajil, A., Khaldi, M., Hamzaoui, B., Al-Rustum, A. & Al-Badairy, H. Formation damage assessment of high pH and salinity completion fluids in gas wells. In Abu Dhabi International Petroleum Exhibition and Conference (SPE, 2017).
Xu, P., Tao, Z. & Wang, Z. Corrosion-resistant systems of formate packer fluid for G3/N80/TP110SS pipes at high temperature, high pressure and high H2S/CO2 ratios. R. Soc. Open Sci. 5(7), 180405 (2018).
Article ADS PubMed PubMed Central Google Scholar
Tariq, Z. et al. Polyoxyethylene quaternary ammonium gemini surfactants as a completion fluid additive to mitigate formation damage. SPE Drill. Complet. 35(04), 696–706 (2020).
Avula, V. R., Prince, M., Reddy, G. S. & Devarapu, S. R. Consistent Rheological Behavior of Formate Based Fluid for Drilling and Workover Operations (Springer, 2022).
Khan, R. A. et al. Ionic liquids as completion fluids to mitigate formation damage. J. Petrol. Sci. Eng. 214, 110564 (2022).
ISO I. 13503-1. Petroleum and natural gas industries-completion fluids and materials-Part 1. In Measurement of Viscous Properties of Completion Fluids (2011).
Brondel, D. et al. Corrosion in the oil industry. Oilfield Rev. Netherl. 6, 2 (1994).
Dong, S. et al. Steel corrosion inhibition by calcium nitrate in halide-enriched completion fluid environments. NPJ Mater. Degrad. 2(1), 32 (2018).
Manual, WC Drilling Department Petronas Carigali SDN BHD (Springer, 1998).
Elgaddafi, R., Ahmed, R. & Shah, S. Corrosion of carbon steel in CO2 saturated brine at elevated temperatures. J. Petrol. Sci. Eng. 196, 107638 (2021).
API. Testing of heavy brines-Recommended practice RP 13J-American Petroleum Institute, Washington, DC www.API.org. (2014).
Civan, F. Reservoir Formation Damage (Gulf Professional Publishing, 2015).
Mahdavi-Kalatehno, J., Khamehchi, E., Abbasi, A. & Khaleghi, M. R. A novel approach to determining appropriate additive concentrations for stimulation of gas carbonate reservoirs. Results Eng. 2023, 89 (2023).
Zhao, X. et al. Formation damage mechanisms associated with drilling and completion fluids for deepwater reservoirs. J. Petrol. Sci. Eng. 173, 112–121 (2019).
Fink, J. Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids (Gulf Professional Publishing, 2021).
Anderson, R. et al. Clay swelling—a challenge in the oilfield. Earth Sci. Rev. 98(3–4), 201–216 (2010).
Article ADS CAS Google Scholar
McPhee, C., Reed, J. & Zubizarreta, I. Core Analysis: A Best Practice Guide (Elsevier, 2015).
Hamzaoui, B. & Moajil, A. M. Scaling and completion fluid pH effect on sandstone formation damage. In SPE/IADC Middle East Drilling Technology Conference and Exhibition (SPE, 2018).
Hamzaoui, B. & Al Moajil, A. M. Causes and mitigation of completion fluids-induced formation damage in high temperature gas wells. In SPE International Conference and Exhibition on Formation Damage Control (OnePetro, 2018).
Hamzaoui, B., Moajil, A. M. A., Yami, I. & Hazzazi, H. Completion fluids-induced formation damage in high temperature gas wells: Causes and mitigation. In Offshore Technology Conference (OTC, 2018).
ASTM D. Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners, 5890-06 (American Society for Testing and Materials, 2006).
Moldoveanu, S. C. & David, V. Selection of the HPLC Method in Chemical Analysis (Elsevier, 2016).
Civan, F. Reservoir Formation Damage: Fundamentals, Modeling, Assessment, And Mitigation (Gulf Professional Publishing, 2023).
Yousefmarzi, F., Haratian, A., Mahdavi Kalatehno, J. & Keihani, K. M. Machine learning approaches for estimating interfacial tension between oil/gas and oil/water systems: A performance analysis. Sci. Rep. 14(1), 858 (2024).
Article ADS CAS PubMed PubMed Central Google Scholar
Schön, J. H. Physical Properties of Rocks: Fundamentals and Principles of Petrophysics (Elsevier, 2015).
Bijani, M., Khamehchi, E. & Ezzati, S. Silica Nanoparticles and pH effect on Sand Production Mechanism due to Smart Water Softening. Lett. Appl. NanoBioSci. 9, 1294–1306 (2020).
Ahmed, T. Petroleum Engineering Handbook (Gulf Professional Publishing, 2006).
Montgomery, D. C. Design and Analysis of Experiments (Wiley, 2017).
Keihani Kamal, M., Mahdavi Kalatehno, J., Daneshfar, P. & Yousefmarzi, F. A comprehensive analysis of carbonate matrix acidizing using viscoelastic diverting acid system in a gas field. Sci. Rep. 14(1), 1499 (2024).
Article ADS CAS PubMed PubMed Central Google Scholar
Jinhua, H. et al. Preparation, characterization and application of environment-friendly high density and low damage solid free completion fluids for completing HTHP oil and gas wells. Geoenergy Sci. Eng. 221, 211351 (2023).
Mahani, H., Keya, A. L., Berg, S. & Nasralla, R. Electrokinetics of carbonate/brine interface in low-salinity waterflooding: Effect of brine salinity, composition, rock type, and pH on?-potential and a surface-complexation model. SPE J. 22(01), 53–68 (2017).
Department of Petroleum Engineering, Amirkabir University of Technology, Tehran, Iran
Parsa Kazemihokmabad, Ehsan Khamehchi, Javad Mahdavi Kalatehno & Reza Ebadi
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
P.K.H., E.K, J.M.K. and R.E. contributed equally to writing the article. All authors reviewed and approved the final manuscript.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Kazemihokmabad, P., Khamehchi, E., Mahdavi Kalatehno, J. et al. A comparative study of brine solutions as completion fluids for oil and gas fields. Sci Rep 14, 12628 (2024). https://doi.org/10.1038/s41598-024-63303-5
DOI: https://doi.org/10.1038/s41598-024-63303-5
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
drilling surfactrant agent Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.