Contrary to popular opinion, Henry Ford didn’t invent the automotive assembly line. That was Ransom Olds of Oldsmobile fame, who reportedly patented his novel manufacturing approach in 1901. Twelve years later, Ford simply took Olds’ good idea and made it better. Much better, it seems. Rather than using a stationary line like Oldsmobile, the Ford Motor Company founder added a moving conveyor, thereby reducing worker fatigue while drastically increasing production throughput. The concept stuck, and more than a century later, the moving assembly line remains an integral piece of most automobile manufacturing.
As with any electromechanical system, however, there’s always room for improvement. Craig Dahl knows this quite well. As manager of the parts and service department at OCC Conveyor Inc., he was a member of the team called upon to design and build a more efficient means of driving the assembly lines at a leading automaker’s plants in the U.S., Canada, and Mexico. welded sled
The heart of what is now known as the “OCC Systems Torque Arm Conveyor Drive” is a custom-built gearbox solution that utilizes the Overhead Conveyor Drive gear unit from NORD DRIVESYSTEMS, who collaborated extensively with OCC on its design and implementation.
OCC Systems Engineering Manager, Carl Wingert, working with NORD developed the extended shaft gearbox specifically for this application. Because conveyor systems in different automotive plants will require different horsepower ratings and output speeds, NORD provided OCC with a complete range of gearboxes to accommodate. That includes everything from 2 horsepower all the way up to 20 horsepower, and conveyor speeds from 5 to 70 feet per minute. Working directly with automotive customers and NORD, OCC has implemented high speed indexing inverted conveyors that are run at 125 FPM.
As Dahl explains, in 2014, their customer asked them to find a more energy-efficient and maintenance-friendly replacement for the legacy “Floating Frame” conveyor drives in service at that time. Working closely with the customer and NORD, OCC soon developed a unit containing far fewer parts and a modular construction.
The customer approved the design and OCC quickly went into production — last year alone, they installed more than 180 of the innovative drive systems.
One key feature of the Torque Arm Conveyor Drive is its ability to use the ANSI X458 and X678 (American National Standards Institute) and comparable styles of Drop Forged Rivetless Chain, an automotive standard that dates back to Henry Ford’s days. It also eliminates all V-belts thanks to an integrated gear motor and brake, has a backup bar and crank arm that allows two systems — one passive, the other active — to work in tandem, and numerous design enhancements such as centralized lubrication, simplified torque settings, and bolt-on adjustable legs for easy leveling.
“By moving away from belts and pulleys, we eliminated numerous connection points, each of which increases friction and leads to power loss,” said Dahl. “The net effect is greater energy efficiency, which we calculate at about 5 percent or more. That might not sound like a lot, but the annual savings in electrical costs are significant for a large manufacturer with hundreds of multi-kilowatt motors on the production floor.”
Perhaps even more important is the ease of maintenance and reduction in conveyor downtime. Not only are the new systems faster to service and repair, but also because of the backup bar and crank arm mentioned earlier, a drive that fails during a production shift can quickly be brought online by switching to the backup system, allowing technicians to service the defective unit after hours.
Dahl notes that this last benefit, even more so than the system’s energy efficiency, is what gets automotive maintenance people so excited when they see the new design. “Talk to anyone responsible for keeping a plant running and that’s what they gravitate to,” he said.
Standardization is similarly important, added Dahl. That’s why OCC Systems — together with their customer — decided early on to work with NORD in developing the extended shaft gear drive, which again, forms the heart of this conveyor drive unit. “NORD has been a great partner for many years, and this is a great example of that. Between its greater efficiency and modular, easily maintained construction, I look forward to seeing more of these units deployed in other assembly lines.”
This article was contributed by OCC Systems (Fernadale, MI). For more information, visit here .
This article first appeared in the August, 2022 issue of Motion Design Magazine (Vol. 46 No. 8).
Read more articles from this issue here.
Read more articles from the archives here.
Future Washable Smart Clothes Powered by Wi-Fi will Monitor Health
MIT Team Takes a Major Step Toward Fully 3D-Printed Active Electronics
Magnetically Controlled Kirigami Surfaces Move Objects: No Grasping Needed
How Pratt & Whitney Uses a Robot to Help Build Jet Engines
3 Energy Technologies that Will Power Your Interest
Phase Change Materials in Electric Vehicles: Trends and a Roadmap for the Future
Implantable Sensors for Internal Health Monitoring
Empowering Sustainability With Software: Practical Steps for a Greener Future
Countering the Evolving Challenge of Integrating UAS Into Civilian Airspace
Designing an HVAC Modeling Workflow for Cabin Energy Management and XiL Testing
Giving Robots the Human Touch via Listening
AI-Powered Assistants Will Be Integrated into Engineering Applications
Answering Your Questions: Lithium-Air Battery vs. Lithium-Ion
Comparison Between Wave Soldering and Reflow Soldering
Printed Electronics: The Future Is Flexible
How AiSee Can Make the Blind ‘See’
Polycarbonate Seen As Top Choice for LED Lighting
How Much Do You Know About Industrial Robotics?
The Modern Industrial Workhorse: PID Controllers
The Basics of Encoder Selection
NASA’s Electric Thrusters Keep Commercial Satellites on the Clock
Smart Sensor Technology for the IoT
Networking the IoT with IEEE 802.15.4/6LoWPAN
The State of AI: Manufacturing 2025
Laser Beam vs. Electron Beam Welding Which process works best for what?
How Jet Engine Flow Can Be Controlled Optically
Mechanical Carbon Materials for Aircraft Seal Applications
Brushless Motors for In-Tank Fuel Pumps
Implantable Sensors for Internal Health Monitoring
The Rise of Advanced Sensor Technologies
How Pratt & Whitney Uses a Robot to Help Build Jet Engines
By submitting your personal information, you agree that SAE Media Group and carefully selected industry sponsors of this content may contact you and that you have read and agree to the Privacy Policy.
You may reach us at privacy@saemediagroup.com.
You may unsubscribe at any time.
industrial total assembly sled © 2009-2025 SAE Media Group