Crmaris November 26, 2018 Featured Tech Reviews, Power Supplies
1. Introduction2. Packaging, Contents & Exterior3. Teardown & Component Analysis4. Load Regulation, Hold-Up Time & Inrush Current5. Efficiency, Temperature & Noise6. Protection Features & DC Power Sequencing7. Cross-Load Tests & Infrared Images8. Transient Response Tests9. Ripple Measurements10. Performance, Value, Noise & Efficiency11. Final Analysis12. View All Pages 420mm radiator case
The Corsair SF450 Platinum offers higher efficiency than its Gold predecessor and it is also bundled with a SFX-to-ATX bracket. The question we will answer today is should you pay more to get the Platinum model or is it better to save some money and go for the Gold model instead?’
Corsair wants to turn things around in the SFX form factor category with new SF Platinum units which are sold in 450W and 600W capacities with a 750W model on the way. We have already evaluated the SF600 Platinum which left a very good impression on us and the time has come for the SF450 Platinum to be laid bare in our test labs.
The Corsair SF450 Platinum shares the same cable configuration with the 600W model which is unusual, as the larger wattage models are normally equipped with additional cables and connectors. Both units are fully modular of course. They are cooled down by fans measuring 92mm in diameter – the largest that an SFX unit can accommodate. By using the largest possible fan, Corsair promises to bring the noise output down even under tough conditions. A quality 92mm fan is able to provide the same airflow as a 80mm fan but at lower speeds – which means less noise emissions.
The most important difference with the previous Gold SF line (which will remain in production), is the efficiency increase which was upgraded from 80 PLUS Gold to 80 PLUS Platinum. In the Cybenetics database both lines fall into the ETA-A efficiency category, however there are notable differences in the noise output, mostly for the 600W SF models.
Obviously the higher efficiency allows for a more relaxed fan profile. In the majority of cases SFX power supplies are noisier compared to ATX models, because of the overpopulated PCBs which don't allow for optimal airflow. Nonetheless, lately the major brands and manufacturers have worked hard to offer lower noise operation in compact platforms as well.
Given the increased interest of all major brands in this category lately, we are curious to see the first passive SFX unit to hit the market, especially since a while ago we had the chance to evaluate the first passive SFX-L model, the SilverStone Nightjar NJ450-SXL.
Read our How We Test Power Supplies HERE Specifications Manufacturer (OEM) Great Wall Max. DC Output 450W Efficiency 80 PLUS Platinum, ETA-A (88-91%) Noise LAMBDA-A (20-25 dB[A]) Modular ✓ (Fully) Intel C6/C7 Power State Support ✓ Operating Temperature (Continuous Full Load) 0 – 50°C Over Voltage Protection ✓ Under Voltage Protection ✓ Over Power Protection ✓ Over Current (+12V) Protection ✓ Over Temperature Protection ✓ Short Circuit Protection ✓ Surge Protection ✓ Inrush Current Protection ✓ Fan Failure Protection ✗ No Load Operation ✓ Cooling 92mm Rifle Bearing Fan (NR092L) Semi-Passive Operation ✓ (non selectable) Dimensions (W x H x D ) 127x 65 x 103mm Weight 0.86 kg (1.9 lb ) Form Factor SFX, EPS 2.92 Warranty 7 Years
Corsair has strengthened its ties with OEM partner Great Wall in the last couple of years and this is welcomed, because due to this tight cooperation the performance bar in the SFX category has reached new levels – which a while ago seemed impossible for such small designs.
All popular protection features are present and the 92mm rifle bearing fan is supported by a semi-passive mode, which unfortunately cannot be deactivated. This means that you should not install this unit with its fan facing downwards as you will trap the hot air internally and this will put quite a strain on the platform's sensitive components (e.g. the electrolytic caps).
The compact dimensions classify this product in the SFX form factor, while it also meets the EPS 2.92 specification requirements. Finally, the provided warranty is seven years. Power Specifications Rail 3.3V 5V 12V 5VSB -12V Max. Power Amps 15 20 37.5 2.5 0.3 Watts 100 450 12.5 3.6 Total Max. Power (W) 450
The minor rails have 100W max combined power, which is more than enough for any normal modern system. The +12V rail typically can deliver the unit's full power alone and the 5VSB rail has 2.5 Amps max current output. Cables & Connectors Modular Cables Description Cable Count Connector Count (Total) Gauge In Cable Capacitors ATX connector 20+4 pin (300mm) 1 1 16-18AWG No 4+4 pin EPS12V (400mm) 1 1 16AWG No 6+2 pin PCIe (700mm) 2 2 16AWG No SATA (100mm+105mm+105mm105mm) 1 4 18AWG No 4 pin Molex (100mm+105mm+105mm) 1 3 18AWG No AC Power Cord (1400mm) 1 1 18AWG –
As we already mentioned, the cable configuration is exactly the same as the SF600 Platinum, which is odd since a single EPS and two PCIe connectors might be enough for 450W but they definitely don't allow a 600W power supply to fully exploit its capacity.
The length of the ATX, EPS and peripheral cables is short since this unit will be most likely installed into a small chassis, although Corsair provides an ATX-to-SFX adapter in the bundle allowing you to use it in any ATX chassis. Strangely enough the pair of PCIe cables is very long at 700mm, clearly standing out from all the rest.
The distance between the peripheral connectors is small at 105mm, however this won't create any problems inside a small chassis where all components are close to each other. Finally, it is nice to see 16 AWG gauges in a 450W unit and the lack of in-cable caps is an asset as well, since most users hate seeing them in PSU cables, because they make those cables difficult to work with.
Tags 450w corsair Corsair SF450 Platinum ETA-A LAMBDA-A platinum Power Supply psu Review SF450 sfx SFX PSU
Is the Microsoft Surface Laptop 7 a 'laptop of the future?'
pc case glass on right side How much HD storage in your next PC?